Clear an EAP Client SessionNEW!

About this task

Perform this procedure to clear an EAP client session on the switch.

Procedure

  1. Enter Privileged EXEC mode:

    enable

  2. Clear the EAP client session.

    Use one of the following options:

    1. Clear by MAC address:

      clear eapol eap [<0x00:0x00:0x00:0x00:0x00:0x00>]

    2. Clear by port:

      clear eapol eap [{slot/port[/sub-port][-slot/port[/sub-port]][,...]} [<0x00:0x00:0x00:0x00:0x00:0x00>]

Example

Clear an EAP client session by MAC address:

Switch:1>enable
Switch:1#clear eapol eap 00:00:00:00:00:01

Clear an EAP client session by port:

Switch:1>enable
Switch:1#clear eapol eap 1/14 00:00:00:00:00:01