Variable Definitions

The following table defines parameters for the radius server host WORD<0-255> used-by {cli|eapol|endpoint-tracking|snmp|web} secure-log-level command.

Variable Value
<critical | debug | error | info | warning>

Specifies the RADIUS secure server log severity level. The default is error.

used-by {cli|eapol|endpoint-tracking|snmp|web}

Configures how the server functions:

  • cli - configures the server for CLI authentication.

  • eapol - configures the server for Extensible Authentication Protocol over LAN (EAPoL) authentication

  • endpoint-tracking - configures the server for Endpoint Tracking authentication

  • snmp - configures the server for Simple Network Management Protocol (SNMP) accounting

  • web - configures the server for web authentication

WORD<0-255>

Configures a host server. WORD <0–255> specifies the IPv4 address, IPv6 address, or fully qualified domain name (FQDN). If you use an FQDN, you must also configure the switch to use DNS.