TDR Field Descriptions

Use data from the following table in the TDR tab.


Name	Description
StartTest	Enables the cable diagnostic test on the current port.
TestDone	Specifies whether the test is complete.
NormalCableLength	Specifies the cable length in meters.
CableLength	Specifies the length of the cable in meters based on the average electrical length of 4 pairs.
CableStatus	Specifies the status of the cable as a summation of the status of the cable conductor pairs. 1—Fail: the cable experiences any combination of open and shorted pairs. 2—Normal: the cable operates without any faults
Pair#Status where # is the number of the pair. For example, Pair1Status.	Specifies the status of the pair. The following lists the states of the cables connected to a port or ports: pairFail pairNormal pairOpen pairShorted pairNotApplicable pairNotTested pairForce pinShort pairUnknown pairOpenShorted pairCrossTalk
Pair#ErrLength where # is the number of the pair. For example, Pair1ErrLength.	Specifies the approximate distance to the break, measured in meters on the first pair.