Display the SPB-PIM Gateway Interface Default Values

Use the following procedure to display the default values used for the SPB-PIM Gateway interface HELLO and JOIN PRUNE intervals unless specifically configured on the individual interface.

Procedure

  1. To enter User EXEC mode, log on to the switch.
  2. Display the SPB-PIM Gateway interface default values:

    show ip spb–pim–gw

Example

Switch:1>show ip spb-pim-gw
================================================================================
                        Spb-pim-gw General Group 
================================================================================
Hello Interval					: 30
Join-Prune Interval			: 60