Variable Definitions

The following table defines parameters for the radius server host command.

Variable Value
WORD<0-255>

Configures a host server. WORD <0–255> specifies the IPv4 address, IPv6 address, or fully qualified domain name (FQDN). If you use an FQDN, you must also configure the switch to use DNS.

used-by

Specifies how the server functions. Configures the server for one of the following:

  • cli authentication

  • eapol authentication

  • endpoint-tracking authentication

  • snmp accounting

  • web authentication

secure-enable

Enables RADSec on the RADIUS server.