Unconfigures the other stateful configuration flag value sent in router discovery advertisements on the This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, 5520 series switches..
| vlan_name | Specifies an IPv6 configured VLAN. |
N/A.
This command sets the other-config-flag parameter to the default value off.
The following example unconfigures the other stateful configuration flag for the VLAN "top_floor":
unconfigure vlan top_floor router-discovery other-config-flag
This command was first available in ExtremeXOS 11.2.
This command is available on the platforms listed for the IPv6 unicast routing feature in the ExtremeXOS and Switch Engine 31.7 Feature License Requirements document.