enable bgp peer-group

enable bgp peer-group peer-group-name

Description

Enables a peer group and all the neighbors of a peer group.

Syntax Description


`peer-group-name`	Specifies a peer group.

Default

Disabled.

Usage Guidelines

You can use BGP peer groups to group together up to 200512 BGP neighbors. All neighbors within the peer group inherit the parameters of the BGP peer group. The following mandatory parameters are shared by all neighbors in a peer group:

source-interface
out-nlri-filter
out-aspath-filter
out-route-map
send-community
next-hop-self

This command applies to the current VR or VRF context.

Example

The following command enables the BGP peer group outer and all its neighbors:

enable bgp peer-group outer

History

This command was first available in ExtremeXOS 10.1.

This command required a specific license in ExtremeXOS 11.1.

Platform Availability

This command is available on platforms that support the appropriate license. For complete information about software licensing, including how to obtain and upgrade your license and which licenses support the BGP feature, see the ExtremeXOS and Switch Engine 31.7 Feature License Requirements document.