configure ospf area external-filter

configure ospf area area-identifier external-filter [policy-map |none]

Description

Configures an external filter policy.

Syntax Description

area-identifier Specifies the OSPF target area.
policy-map Specifies a policy.
none Specifies not to apply an external filter (removes the existing policy, if any).

Default

N/A.

Usage Guidelines

For switches configured to support multiple OSPF areas (an ABR function), a policy can be applied to an OSPF area that filters a set of OSPF external routes from being advertised into that area.

Using the none mode specifies that no external filter is applied.

Example

The following command configures an external filter policy, nosales:

configure ospf area 1.2.3.4 external-filter nosales

History

This command was first available in ExtremeXOS 10.1.

Platform Availability

This command is available on platforms with an Advanced Edge or Base license, or higher, as described in the ExtremeXOS and Switch Engine 31.7 Feature License Requirements document.