show l2pt profile

show l2pt profile profile_name

Description

Displays the contents of an L2PT profile.

Syntax Description


profile	Displays profile that defines L2PT configuration for L2 protocols.
`profile_name`	Displays only the specified profile.

Default

Disabled.

Usage Guidelines

Use this command to display the contents of an L2PT profile.

Example

The following is an example of the command's output:

# show l2pt profile
                                                                      DSCP
Profile Name                      Protocol Filter Name              Action  CoS    DSCP  Replace
--------------------------------  --------------------------------  ------  ---    ----  ------
my_l2pt_access_prof               my_list                           tunnel    1      63  Yes
                                  my_other_list                     tunnel    7       0  No 
my_l2pt_network_prof              mylist                            encap            20  No
                                  my_other_list                     encap             8  No
                                  my_none¬_list                     none             25  No
 
# show l2pt profile my_l2pt_access_prof
 
                                                                                         DSCP
Profile Name                      Protocol Filter Name              Action  CoS    DSCP  Replace
--------------------------------  --------------------------------  ------  ---    ----  ------
my_l2pt_access_prof               my_list                           tunnel    1      23  Yes
                                  my_other_list                     tunnel    7       0  No

History

This command was first available in ExtremeXOS 15.5.

Support for DSCP was added in ExtremeXOS 31.3.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, and 5520 series switches.