configure syslog reference-identifier

configure syslog [all |ipaddress {tls-port tls_port}] {vr vr_name} {local} reference-identifier reference_identifier

Description

Specifies the remote Syslog server certificate reference identifier.

Syntax Description

all All specified targets.
ipaddress Specifies the remote Syslog server IPv4 or IPv6 address.
tls-port Specifies using a remote Syslog server Transport Layer Security (TLS) port.
tls_port Specifies the remote Syslog server Transport Layer Security (TLS) port (default is 6514).
vr Specifies a virtual router.
vr_name Specifies the virtual router ID.
local Specifies the remote Syslog server facility: "local0" "local1" "local2" "local3" "local4" "local5" "local6" "local7".
reference-identifier Remote Syslog server certificate reference identifier.
reference_identifier Identifier value (for example, the host name). If none is specified, the existing reference identifier configuration is removed.

Default

If a TLS port is not specified, the default is 6514.

Example

The following example specifies the reference identifier as "hostname" for all specified targets on VR "vr1":

# configure syslog all vr vr1 reference-identifier hostname

History

This command was first available in ExtremeXOS 22.3.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, and 5520 series switches.