Configures a list of unique values that identify the remote Auto-peering devices to which this device can also automatically form an adjacency.
| auto-peering | Specifies Auto-peering. |
| one-config | Specifies changing the BGP Auto-peering OneConfig configuration. |
| remote | Specifies a remote device connecting in the Auto-peering network. |
| id | Specifies configuring the BPG Auto-peering ID that devices advertise to neighbors. |
| add | Specifies adding a remote ID. |
| delete | Specifies deleting a remote ID. |
| id | Specifies the ID. |
| password | Configures the password for Auto peering neighbors. |
| none | Removes the current password |
| encrypted | Specifies that the password is in encrypted format. |
| tcpPassword | Specifies the TCP MD5 password/secret-key. |
N/A.
Not specifying a password will result in unsecure peering. Remote ID neighbors can use MD5 passwords for neighboring security. The lower ID password is used.
The following example adds the remote Auto-peering device with ID "2222" and sets the password as "123":
# configure auto-peering one-config remote id add 2222 password 123
This command was first available in ExtremeXOS 31.1.
This command is available on the ExtremeSwitching X670-G2, X465, X590, X690, X695, X870, 5320, 5420, 5520 series switches.
This feature requires the Advanced Edge or Base license. For more information about licenses, see the ExtremeXOS and Switch Engine 31.7 Feature License Requirements .