Allows you to add a remote MEP with the given MEP ID and MAC address to an existing association.
| domain_name | Enter the domain associated with the MA you are configuring. |
| association_name | IEEE 802.1ag or ITU-T Y.1731 association name. |
| mepid | Enter the MEP ID of the remote MEP being added. The range is 1 to 8191. |
| mac_address | Specifies the MAC address for the remote MEP being added. |
N/A.
Use this command to add a remote MEP with given MEP ID and MAC address to an existing association. Use the show cfm detail command to verify your configuration.
This command was first available in ExtremeXOS 12.1.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, and 5520 series switches.