configure vrrp vlan vrid delete ipaddress

configure vrrp vlan [vlan_name |vlan_id] vrid vridval delete ipaddress

Description

Deletes a virtual IPv4 or IPv6 address from a specific VRRP router.

Syntax Description

vlan_name

Specifies the name of a VRRP This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, 5520 series switches..

vlan_id VLAN ID tag (1–4,094).
vridval Specifies the VRID of the VRRP instance. To display the configured VRRP router instances, enter the show vrrp command.
ipaddress Specifies the virtual IP address to be deleted from the VRRP instance. This is common for IPv4/IPv6 addresses.

Usage Guidelines

When a VRRP router is enabled, it must have at least one virtual IP address. When the VRRP router is not enabled, there are no restrictions on deleting the IP address.

Example

The following command removes IP address 10.1.2.3 from VLAN vlan-1:

configure vrrp vlan vlan-1 vrid 1 delete 10.1.2.3

History

This command was first available in ExtremeXOS 10.1.

The vlan_id option was added in ExtremeXOS 22.3.

Platform Availability

This command is available on platforms that support the appropriate license. For complete information about software licensing, including how to obtain and upgrade your license and which licenses support the VRRP feature, see the ExtremeXOS and Switch Engine 31.7 Feature License Requirements document.