configure mirror to remote-ip delete

configure mirror {mirror_name to remote-ip delete [all | remote_ip_address {{vr} vr_name}] }

Description

Removes one or all of the redundant remote IP addresses from a mirror instance.

Syntax Description

mirror_name Mirror instance name.
to Selects mirroring to another location.
remote-ip Send mirrored packets to specified destination IP address using L2 GRE encapsulation.
delete Delete all or one remote IP addresses from a mirror instance.
all Delete all remote IP addresses from a disabled mirror instance.
remote_ip_address Delete the specified existing remote IP address from a mirror instance.
vr Specifies a virtual router.
vr_name Specifies the name of the virtual router to which this command applies. If a name is not specified, the current CLI context is used.

Default

If a virtual router is not specified, the current CLI context is used.

Usage Guidelines

To delete all or the last remaining remote IP address, you must disable the mirror first (disable mirror [mirror_name | all]).

Example

The following example removes the remote IP address "1.1.3.3" from the mirror instance "m1":

# configure mirror m1 to remote-ip delete 1.1.3.3

History

This command was first available in ExtremeXOS 30.4.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, and 5520 series switches.