enable ip-security anomaly-protection notify

enable ip-security anomaly-protection notify [log | snmp | cache] {slot [ slot | all ]}

Description

Enables protocol anomaly notification.

Syntax Description

log Specifies the switch to send the notification to a log file.
snmp Specifies the switch to send an SNMP trap when an event occurs.
cache Specifies the switch to send the notification to cache.
slot Specifies the slot to be used.
all Specifies all IP addresses, or all IP addresses in a particular state.

Default

The default is disabled.

Usage Guidelines

This command enables anomaly notification. When enabled, any packet failed to pass enabled protocol checking is sent to XOS Host CPU and notifies the user. There are three different types of notifications:
  • log: The anomaly events are logged into EMS log.
  • snmp: The anomaly events generate SNMP traps.
  • cache: The most recent and unique anomaly events are stored in memory for review and investigation.

When disabled, the switch drops all violating packets silently.

History

This command was first available in ExtremeXOS 12.0.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, and 5520 series switches.