show igmp snooping vlan static

show igmp snooping {vlan} name static [group | router]

Description

Displays static IGMP snooping entries.

Syntax Description

name Specifies a This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, 5520 series switches. name.
group Displays static multicast groups.
router Displays static router entries.

Default

None.

Usage Guidelines

Use this command to display the IGMP snooping static groups or router ports configured on the specified VLAN. When no VLAN is specified, all the static groups or router ports are displayed.

Example

The following command displays the IGMP snooping static groups configured on VLAN vlan101:

# show igmp snooping vlan101 static group
VLAN vlan101 (4094)
Group            Port   Flags
239.1.1.2        29      s-
239.1.1.2        30      s-
239.1.1.2        31      sa
239.1.1.2        32      s-
239.1.1.2        34      s-
Total number of configured static IGMP groups = 5
Flags: (s) Static, (a) Active

History

This command was first available in ExtremeXOS 10.1.

Platform Availability

This command is available on platforms that support the appropriate license. For complete information about software licensing, including how to obtain and upgrade your license and which licenses support the IGMP snooping feature, see the ExtremeXOS and Switch Engine 31.7 Feature License Requirements document.