show snmp traps bfd

show snmp traps bfd


This command displays session up/down trap reception for BFD.

Syntax Description

snmp Configure SNMP specific settings.
traps Configure SNMP Trap generation settings.
bfd BFD-specific traps.


Not applicable.

Usage Guidelines

Use this command to display SNMP trap reception for BFD session up/down.


The following command displays SNMP Trap configuration for BFD:

#show snmp traps bfd
SNMP Traps for Session Down    : Enabled
SNMP Traps for Session Up      : Enabled
SNMP Traps Batch Delay         : 1000 ms


This command was first available in ExtremeXOS 15.5.

Platform Availability

This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5420, 5520 series switches.