Delete an entry from the unicast master table for a PTP clock instance. This command is available only for boundary clocks.
|
boundary |
Boundary clock. |
|
ordinary |
Ordinary clock. |
|
ipv4_address |
IPv4 address of a master to the local clock. |
|
vlan_name |
This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, 5520 series switches. name to which the command is to be applied. |
N/A.
Use this command to delete an entry from the unicast master table for a PTP clock instance. This command is available only for boundary clocks.
The following command removes a static unicast master entry from boundary clock:
# configure network-clock ptp boundary delete unicast-master 192.168.1.1 vlan lpbk-gm
The following command removes a static unicast master entry from ordinary clock:
# configure network-clock ptp ordinary delete unicast-master 192.168.15.10 vlan lpbk-master
This command was first available in ExtremeXOS 15.1 Revision 2.
This command is available on ExtremeSwitching X670-G2, and X460-G2 series switches.
Note
PTP commands can be used only with the Network Timing feature pack.