This command displays counters for an area or a This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, 5520 series switches..
| area_name | Specifies a router process for which to display the IS-IS counters. If you do not specify an IS-IS area, the software displays counters for all areas. |
| vlan_name | Specifies a VLAN for which to display IS-IS counters. |
| all | Displays IS-IS counters for all areas or VLANs. |
None.
If you enter the show isis counters command without any additional keywords or parameters, the software displays the counters for all areas.
The following command displays the IS-IS counters for the configured area:
show isis counters
The following command displays the IS-IS counters for the SJvlan VLAN:
show isis counters vlan SJvlan
This command was first available in ExtremeXOS 12.1.
This command is available on platforms with a Core or Premier license as described in the ExtremeXOS and Switch Engine 31.7 Feature License Requirements document.