Configures whether or not captive portal ACL rules are programmed within the reserved space for ONEPolicy.
| captive-portal | Configures captive portal elements. |
| rule-use | Configures captive portal rule use. |
| reserved | Configures captive portal to program rules in the space reserved by resource-profile configuration at the expense of IPv4 group rules. |
| unreserved | Configures captive portal to program rules outside the space reserved by resource-profile configuration (default). |
By default, captive portal rules are programmed outside of the reserved space for ONEPolicy.
If not specified to do otherwise, ONEPolicy programs its captive portal-related rules outside of the reserved ACL rule space for ONEPolicy (unreserved). This results in additional ACL slice usage. This command enables you to specify that these rules are programmed within the already reserved ACL rule space at the expense of IPv4 rule capacity (reserved).
To view the selection for this command, use the show policy captive-portal {web-redirect {redirect_index | all} | listening | rule-use} command with the rule-use option.
The following example confines captive portal ACL rules to the reserved space for ONEPolicy:
# configure policy captive-portal rule-use reserved
This command was first available in ExtremeXOS 30.4.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, and 5520 series switches.