disable ospfv3 export

disable ospfv3 export [direct | ripng | static | isis | isis-level-1 | isis-level-1-external | isis-level-2 | isis-level-2-external | bgp e-bgp i-bgp]


Disables redistribution of routes to OSPFv3.

Syntax Description

direct Specifies direct routes.
ripng Specifies RIP routes.
static Specifies static routes.
isis Specifies IS-IS routes.
isis-level-1 Specifies IS-IS Level 1 routes.
isis-level-1-external Specifies IS-IS Level 1 External routes.
isis-level-2 Specifies IS-IS Level 2 routes.
isis-level-2-external Specifies IS-IS Level 2 External routes.
bgp Specifies BGP IPv6 routes.
e-bgp Specifies EBGP routes.
i-bgp Specifies EBGP routes.


The default setting is disabled.

Usage Guidelines

Use this command to stop OSPFv3 from exporting routes derived from other protocols.


The following command disables OSPFv3 to export RIPng routes to other OSPFv3 routers:

disable ospfv3 export ripng


This command was first available in ExtremeXOS 11.2.

Platform Availability

This command is available on platforms with an Advanced Edge or Base license, or higher, as described in the ExtremeXOS and Switch Engine 31.7 Feature License Requirements document.