unconfigure rip

unconfigure rip {vlan vlan-name | all}


Resets all RIP parameters to the default for all This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, 5520 series switches.s or for the specified VLAN.

Syntax Description


Specifies a VLAN name.



Usage Guidelines

Does not change the enable/disable state of the RIP settings.


The following command resets the RIP configuration to the default for the VLAN finance:

# unconfigure rip finance


This command was first available in ExtremeXOS 10.1.

Platform Availability

This command is available on all platforms with an Edge or Base license or higher as described in the ExtremeXOS and Switch Engine 31.7 Feature License Requirements document.