configure erps revert

configure {erps} ring-name revert [ enable | disable ]


Add or delete ERPS revert operation along with the “wait-to-restore” time interval.

Syntax Description

ring-name Alphanumeric string that identifies the ERPS ring.
enable Enable revert mode to ERPS ring.
disable Disable revert mode from ERPS ring.


The default is the revertive mode (enable).

Usage Guidelines

Use this command to enable/disable a G.8032 ring to revert to the original ring protection link (RPL) block state.


The following command disables revert mode from an ERPS ring named “ring1”:

configure erps ring1 revert disable


This command was first available in ExtremeXOS 15.1.

Platform Availability

This command is available on all platforms supported in 12.6 and forward that are running ExtremeXOS.