show pim snooping

show pim snooping {vlan} vlan_name

Description

Displays the PIM snooping configuration for a This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, 5520 series switches..

Syntax Description


`vlan_name`	Specifies a VLAN.

Default

Disabled.

Usage Guidelines

None.

Example

The following command displays the PIM snooping configuration for the default VLAN:

* sw1.79 # show pim snooping  "Default" 
PIM Snooping               ENABLED  
Vlan Default(1)            Snooping DISABLED

The following command displays global PIM Snooping configuration:

* (pacman debug) sw1.81 # show pim snooping 
PIM Snooping         Enabled  
<S,G,RPT> Prune      Accept   
Vlan             PIM Snooping     DR               #Nbr   
l18              Enabled          NO DR            0

History

This command was first available in ExtremeXOS 12.1.

<S,G,RPT> Prune option was added in ExtremeXOS 15.7.

Platform Availability

This command is available on platforms that support the appropriate license. For complete information about software licensing, including how to obtain and upgrade your license and which licenses support the PIM feature, see the ExtremeXOS and Switch Engine 31.7 Feature License Requirements document.