disable cfm segment frame-delay measurement

disable cfm segment frame-delay measurement segment_name {mep mep_id}


Stops DMM frame transmission.

Syntax Description


An alpha numeric string identifying the segment name.

mep mep_id

Specifies the maintenance association End Point that helps trigger a particular MEP level session on that segment. The range is 1-8191. The default is all MEPs on the segment.



Usage Guidelines

Use this command to stop transmission of DMM frames for a selected CFM segment. This command stops transmission that has been triggered using the command enable cfm segment frame-delay measurement.

This stops the transmission for both continuous and on-demand mode.


The following command stops frame transmission on the CFM segment segment-first:

disable cfm frame-delay measurement segment-first


This command was first available in ExtremeXOS 12.3.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, and 5520 series switches.