Removes a user-defined STPD from the switch.
| stpd_name | Specifies a user-defined STPD name on the switch. |
N/A.
If your STPD has the same name as another component, for example a This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, 5520 series switches., we recommend that you specify the identifying keyword as well as the name. If you do not specify the stpd keyword, an error message similar to the following is displayed:
%% Ambiguous command: "delete Test"
In this example, to delete the STPD Test, enter delete stpd Test.
If you created an STPD with a name unique only to that STPD, the keyword stpd is optional.
The default STPD, s0, cannot be deleted.
In an MSTP environment, you cannot delete or disable a CIST if any of the MSTIs are active in the system.
The following example deletes an STPD named "purple_st":
delete stpd purple_st
This command was first available in ExtremeXOS 10.1.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, and 5520 series switches.