Allows the local router to accept peering sessions intended for the specified alternate local autonomous system (AS).
| bgp | Specifies BGP. |
| neighbor | Specifies BGP neighbor. |
| all | Selects configuring all BGP neighbors. |
| remoteaddr | Selects configuring the specified BGP neighbor (IP address). |
| alternate-local-as | Allow alternate local AS number for peering with this neighbor |
| asNumber | AS number (0–4,294,967,295). |
N/A.
This command provides configuration flexibility, particularly when peering with third-party devices that may use a different AS number than the ExtremeXOS device uses for auto-peering.
The following example configures the BPG neighbor at 192.168.99.1 to use an alternate local AS "50":
# configure bgp neighbor 192.168.99.1 alternate-local-as 50
This command was first available in ExtremeXOS 30.2.
This command is available on platforms that support the appropriate license. For complete information about software licensing, including how to obtain and upgrade your license and which licenses support the BGP feature, see the ExtremeXOS and Switch Engine 31.7 Feature License Requirements document.