disable rip export

disable rip export [bgp | direct | e-bgp | i-bgp | ospf | ospf-extern1 | ospf-extern2 | ospf-inter | ospf-intra | static | isis | isis-level-1| isis-level-1-external | isis-level-2| isis-level-2-external ]

Description

Disables RIP from redistributing routes from other routing protocols.

Syntax Description

bgp Specifies BGP routes.
direct Specifies interface routes (only interfaces that have IP forwarding enabled are exported).
e-bgp Specifies external BGP routes.
i-bgp Specifies internal BGP routes.
ospf Specifies all OSPF routes.
ospf-extern1 Specifies OSPF external route type 1.
ospf-extern2 Specifies OSPF external route type 2.
ospf-inter Specifies OSPF-inter area routes.
ospf-intra Specifies OSPF-intra area routes.
static Specifies static routes.
isis Specifies IS-IS routes.
isis-level-1 Specifies ISIS Level 1 routes.
isis-level-1-external Specifies ISIS Level 1 External routes.
isis-level-2 Specifies ISIS Level 2 routes.
isis-level-2-external Specifies ISIS Level 2 External routes.

Default

Disabled.

Usage Guidelines

This command disables the exporting of BGP, static, direct, and OSPF-learned routes into the RIP domain.

Example

The following command disables RIP from redistributing any routes learned from OSPF:

# disable rip export ospf

History

This command was first available in ExtremeXOS 10.1.

Platform Availability

This command is available on all platforms with an Edge or Base license or higher as described in the ExtremeXOS and Switch Engine 31.7 Feature License Requirements document.