Displays the current ping protection state for IPv4 or IPv6 routes, along with the number of protected routes. The information can be displayed per gateway, or for all gateways in a given VR.
| ipv4 | Specifies IPv4 routes (default). |
| ipv6 | Specifies IPv6 routes. |
| protection ping | Specifies protection ping information. |
| v4_or_v6_gateway | Name of the specific IPv4 or IPv6 gateway to show protected routes for. |
| vr vr_name | Shows all protected routes for the specified VR. |
| detail | Displays timestamps of the last time each gateway transitioned to the "up" state and to the "down" state. |
If not specified, IPv4 is the default.
The following example shows all ping protected IPv4 routes only:
# show iproute protection ping
Ping protection for static IPv4 routes : Enabled
Interval : 2
Misses : 3
Gateway State # Routes VR
--------------- ----- -------- --------------------------------
1.2.3.4 Down 1 VR-Default
1.2.3.5 Up 1 VR-Default
The following example shows ping protected IPv6 routes only:
# show iproute ipv6 protection ping
Ping protection for static IPv6 routes : Enabled
Interval : 2
Misses : 3
Gateway State # Routes VR
--------------------------------------- ----- -------- ----------
2000:2000:2000:2000:2000:2000:2000:2001 Up 2 VR-Default
3000::2 Down 2 VR-Default
The following example shows ping protected IPv6 routes with gateway up/down transition timestamp information:
# show iproute ipv6 protection ping detail
Ping protection for static IPv6 routes : Enabled
Interval : 2
Misses : 3
Gateway: 2000:2000:2000:2000:2000:2000:2000:2001
State: Up
# Routes: 2
VR: VR-Default
Last Up: Thu Mar 31 22:44:12 2016
Last Down: Thu Mar 31 22:42:22 2016
Gateway: 3000::2
State: Down
# Routes: 2
VR: VR-Default
Last Up: --
Last Down: Thu Mar 31 22:42:22 2016
This command was first available in ExtremeXOS 22.1.
This command is available on all platforms with any license level as described in the ExtremeXOS and Switch Engine 31.7 Feature License Requirements document.