configure database max-retry-interval

configure database max-retry-interval retry_interval

Description

Specifies the maximum value for exponentially increasing time interval between retries for an Automation Edge remote VXLAN network identifier (VNI)-device database.

Syntax Description

database Makes time interval retries remote VNI-database.
max-retry-interval Specifies setting the maximum value for exponentially increasing time interval between retries.
retry_interval Specifies the value for the maximum time interval between retries in seconds. The default is 600. The range is 1 to 3,600.

Default

If not specified, the maximum retry interval is 600 seconds.

Usage Guidelines

N/A.

Example

The following example sets the maximum retry interval to 800 seconds:

# configure database max-retry-interval 800

History

This command was first available in ExtremeXOS 31.1 as a demonstration feature.

This command is fully supported in ExtremeXOS 31.2.

Platform Availability

This command is available on ExtremeSwitching X465, X590, X670-G2, X690, X695, X870, 5320, 5420, 5520 series switches.