show snmpv3 extreme-target-addr-ext

show snmpv3 extreme-target-addr-ext [[hex hex_addr_name] | addr_name]

Description

Displays information about SNMPv3 target addresses enhanced or standard mode.

Syntax Description


`hex_addr_name`	Specifies an identifier for the target address. The value is to be supplied as a colon separated string of hex octets.
`addr_name`	Specifies a string identifier for the target address.

Default

N/A.

Usage Guidelines

Use this command to display entries in the SNMPv3 extremeTargetAddressExtTable.

Example

The following command displays the entry for the target address named A1:

show snmpv3 extreme-target-addr-ext A1

The following is sample output from this command:

x670.26 # show snmpv3 extreme-target-addr-ext 

Target Addr Name        : v1v2cNotifyTAddr1
Mode                    : Enhanced
IgnoreMPModel           : No
UseEventComm            : Yes 

Target Addr Name        : v1v2cNotifyTAddr2
Mode                    : Enhanced
IgnoreMPModel           : No
UseEventComm            : Yes 

Total num. of entries in extremeTargetAddrExtTable : 2

History

This command was first available in ExtremeXOS 10.1.

The hex_addr_name parameter was added in ExtremeXOS 11.0.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, and 5520 series switches.