This command sets the time to wait for an acknowledgement of a transmitted LSP on a point-to-point interface.
| vlan all | Applies the timer value to all IS-IS This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, 5520 series switches.s. |
| vlan_name | Specifies a single VLAN to which the timer configuration applies. |
| seconds | Defines the timer value. The range is 0 to 65535 seconds. |
5 seconds.
If an acknowledgement is not received when the timer expires, the LSP is resent and the timer is reset.
The following command sets the retransmit interval for the SJvlan to 10 seconds:
configure isis SJvlan timer retransmit-interval 10
This command was first available in ExtremeXOS 12.1.
This command is available on platforms with a Core or Premier license as described in the ExtremeXOS and Switch Engine 31.7 Feature License Requirements document.