configure mirror control_index

configure mirror control_index [ add | delete ] mirror_name


Adds or deletes existing mirrors to a mirror MIB instance (specified by a control index) .

Syntax Description

mirror_name Specifies a specific mirror name to add to or delete from a mirror MIB instance.

Mirror destination control index (1–4).

Also known as: etsysMirrorDestinationControlIndex. Each comprises a group of mirror names.

add Specifies adding a mirror name to group referenced by a control index.
delete Specifies deleting a mirror name from a group referenced by a control index.



Usage Guidelines

To use policy-based mirroring, you need a mirror MIB instance (designated by a control index) with one or more associated mirrors to apply mirrors to a policy profile.

Only mirrors with a single 'to' port or remote-ip can be applied to a mirror MIB instance.


The following example adds existing mirror "mirror1" to mirror MIB instance with control index "2":

configure mirror 2 add mirror1


This command was first available in ExtremeXOS 30.2.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, and 5520 series switches.