Clears counters for MAC Security (MACsec) encryption and authentication.
| ports | Specifies port to configure. |
| port_list | Lists ports to clear MACsec counters on. |
Counters for all MACsec ports are cleared unless you choose specific MACsec ports.
This command clears the 4 packet/octet values of the show macsec ports port-list usage command, as well as all the statistics shown under the heading “SecY Interface Statistics” of the show macsec ports port-list detail command.
Additionally, all MACsec port statistics are cleared by the clear counters ports {port_list | all} command.
The following example clears all MACsec counters on port 44:
# clear macsec counters ports 44
This command was first available in ExtremeXOS 30.1.
This command is available on the following platforms.
Note
The MACsec feature requires the installation of the MAC Security feature pack license.| Platform | Ports | LRM/MACsec Adapter Required? |
|---|---|---|
| ExtremeSwitching X460-G2-24p-24hp, X460-G2-24t-24ht switches | Half-duplex, 1G ports (25–48) | No |
| All other SFP/SFP+ ports * | Yes | |
| ExtremeSwitching X450-G2, X460-G2, X670-G2, X440-G2, X590, X620, X690, and X695 series switches | SFP/SFP+ ports * | Yes |
| ExtremeSwitching X465 |
X465-24W, X465-24XE: ports 1–24 X465-48T, X465-48P, X465-48W, X465i-48W: ports 1–48 X465-24MU-24W: ports 25–48 VIM5-4XE: all 4 ports VIM5-4YE in X465-24MU, X465-24MU-24W switches: all 4 ports VIM5-4YE in X465-24W, X465-48T, X465-48P, X465-48W, X464.24S, X465-24S, X465i-48W: first 2 ports only |
No |
| ExtremeSwitching 5320 | All ports of all models except stacking ports. | No |
| ExtremeSwitching 5420 | All ports of all models except stacking ports. | No |
| ExtremeSwitching 5520 | All ports, except 5520-VIM-4X and 24X 10G ports | No |
|
Note: * For ExtremeSwitching X460-G2
series switches, the VIM-2X option does not support the
LRM/MACsec Adapter.
|
||