Disables the restart helper router from terminating graceful OSPF restart when received LSAs would affect the restarting router.
| all | Specifies all This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, 5520 series switches.s. |
| vlan-name | Specifies a VLAN name. |
| router-identifier | Specifies the router ID of the remote router of the virtual link. |
| area-identifier | Specifies an OSPF area. |
The default is enabled.
This command disables the restart helper router from terminating graceful OSPF restart when received LSAs would affect the restarting router.
The following command disables a router from terminating graceful OSPF restart for all routers in area 10.20.30.40 if it receives an LSA that would affect routing:
disable ospf area 10.20.30.40 restart-helper-lsa-check
This command was first available in ExtremeXOS 11.3.
This command is available on platforms with an Advanced Edge or Base license, or higher, as described in the ExtremeXOS and Switch Engine 31.7 Feature License Requirements document.