show network-clock ptp counters

show network-clock ptp [boundary | ordinary] vlan [vlan_name {{ipv4_address} [unicast-master | unicast-slave]} | all {unicast-master | unicast-slave}] counters

Description

This command displays the count of PTP packets that include event messages, signaling and management messages transmitted and received on each unicast-slave/unicast-master peers. Use the following queries for the counters:

Per unicast-master or unicast-slave peer on a clock port.
All unicast-master or unicast-slave peers on a clock port.
Peers on a clock port.
unicast-master or unicast-slave peers on all clock ports.
Peers on all clock ports.

The refresh option is not supported for the counters. This command is available only for Boundary and Ordinary clocks.

Syntax Description


network-clock	External clock for ethernet synchronization.
ptp	Precise time protocol.
boundary	Boundary clock.
ordinary	Ordinary clock.
vlan	This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, 5520 series switches..
`ipv4_address`	Peer IP address.
unicast-master	IP addresses that are masters to the local clock.
unicast-slave	IP addresses that are slaves to the local clock.
all	All VLANS.
counters	PTP message counts.

Default

N/A.

Usage Guidelines

Use this command to display the count of PTP packets that include event messages, signaling and management messages transmitted and received on each unicast-slave/unicast-master peers.

Example

# show network-clock ptp boundary vlan lpbk-gm 1.1.1.101 unicast-master counters
VLAN name:        lpbk-gm
Peer IP Address:  1.1.1.101
IN (packets)       OUT (packets)  Message Type
==================  ==================  =============
211                   0  Announce
27041                   0  Sync
0                   0  FollowUp
0               26532  DelayReq
26489                   0  DelayResp
0                   0  Management
141                 150  Signaling
0                      Rejected
# show network-clock ptp boundary vlan all unicast-slave counters
VLAN name:        lpbk-slave
Peer IP Address:  15.1.1.1
IN (packets)       OUT (packets)  Message Type
==================  ==================  =============
0                 258  Announce
0               32958  Sync
0               32958  FollowUp
0                   0  DelayReq
0                   0  DelayResp
0                   0  Management
0                   0  Signaling
0                      Rejected
VLAN name:        lpbk-slave
Peer IP Address:  15.1.1.2
IN (packets)       OUT (packets)  Message Type
==================  ==================  =============
0                 258  Announce
0               32960  Sync
0               32960  FollowUp
31569                   0  DelayReq
0               31569  DelayResp
0                   0  Management
166                   0  Signaling
0                      Rejected

History

This command was first available in ExtremeXOS 15.2.

Platform Availability

This command is available on the ExtremeSwitching X460-G2, X670-G2 series switches.

Note

PTP commands can be used only with the Network Timing feature pack.