Configures the hold time of the neighbor information .
| seconds | Duration in seconds that receiver must keep this packet. The range is 10-255 and the default is 180 seconds. |
60 seconds.
Use this command to configure the hold time of the neighbor information for which a receiving device should hold information before discarding it.
The following command configures the CDP hold time as two minutes:
configure cdp hold-time 120
This command was first available in ExtremeXOS 15.4.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, and 5520 series switches.