show policy convergence-endpoint connections

show policy convergence-endpoint connections ports [port_list | all]


This command displays all learned Convergence End Points (CEPs) information.

Syntax Description

port_list List of ports to show CEPs on.
all Specifies that information for CEPs on all ports should appear.




The following example shows CEPs for port 12:

# show policy convergence-endpoint connections ports 12
Convergence End Point Connection Info for port 12
Endpoint Type    cisco
Policy Index     3
Discovery Time   Mon FEB 06 02:31:42 2008
Firmware Version
Address Type     unknown
Endpoint IP      unavailable
Endpoint MAC     00:04:0d:01:f8:35


This command was first available in ExtremeXOS 22.2.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, and 5520 series switches.