Enables the IGMP snooping fast leave feature on the specified This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, 5520 series switches..
| name | Specifies a VLAN. |
Disabled.
The fast leave feature operates only with IGMPv2.
To view the fast leave feature configuration, use the show configuration msmgr command. This show command displays the fast leave configuration only when the feature is enabled.
The following example enables the IGMP snooping fast leave feature on the default VLAN:
enable igmp snooping "Default" fast-leave
This command was first available in ExtremeXOS 12.1.
This command is available on platforms that support the appropriate license. For complete information about software licensing, including how to obtain and upgrade your license and which licenses support the IGMP snooping feature, see the ExtremeXOS and Switch Engine 31.7 Feature License Requirements document.topic/ph "/>