unconfigure vlan router-discovery

unconfigure vlan vlan_name router-discovery {ipv6}

Description

Unconfigures all the router-discovery parameters and resets them to their respective default values.

Syntax Description


`vlan_name`	Specifies an IPv6 configured This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, 5520 series switches..

Default

N/A.

Usage Guidelines

Each of the router-discovery parameters is set to the default value. For example, the default-lifetime parameter is set to 1800 seconds. The default value for each of the router-discovery parameters is listed in the corresponding configure vlan router-discovery command description.

Example

The following example unconfigures all the router-discovery parameters for the VLAN top_floor:

unconfigure vlan top_floor router-discovery

History

This command was first available in ExtremeXOS 11.2.

Platform Availability

This command is available on the platforms listed for the IPv6 unicast routing feature in the ExtremeXOS and Switch Engine 31.7 Feature License Requirements document.