Displays IP statistics for the switch CPU for a particular This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, 5520 series switches..
| name | Specifies a VLAN name. |
| tunnel_name | Specifies a tunnel name. |
N/A.
This command only shows statistics of the CPU-handled packets. Not all packets are handled by the CPU.
The fields displayed in the show ipstats command are defined in the following tables.
| Field | Definition |
|---|---|
| Packets IN/OUT | Total number of IP packets received or transmitted on a VLAN router interface. |
| Octets IN/OUT | Total number of octets received or transmitted on a VLAN router interface. |
| Mcast packets IN/OUT | Total number of multicast packets received or transmitted on a VLAN router interface. |
| Bcast packets IN/OUT | Total number of broadcast packets received or transmitted on a VLAN router interface. |
| Errors IN/OUT | Total number of IP packets with errors received or transmitted on a VLAN router interface. |
| Discards IN/OUT | Total number of IP packets that cannot travel up to the CPU due to lack of buffer space. |
| Unknown Protocols IN/OUT | Total number of IP packets with unknown upper layer protocols received by the router interface. |
The following example displays IP statistics for the VLAN "accounting":
show ipstats vlan accounting
This command was first available in ExtremeXOS 10.1.
The ipv4 keyword was added in ExtremeXOS 11.2.
The VR option was removed in ExtremeXOS 30.1.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, and 5520 series switches.