configure vm add | delete ports

configure vm vm_name {add | delete} ports portlist


Adds or deletes dedicated Application Hosting (IAH) or management ports to a virtual machine (VM).

Syntax Description

vm Designates a virtual machine.
vm_name Specifies the VM name to add or delete ports to.
add Designates adding IAH ports to a VM.
delete Designates deleting IAH ports from a VM.
ports Designates adding or deleting ports.
portlist Selects the IAH ports to add or delete.



Usage Guidelines

Multiple VMs cannot use the same sideband port, but they can share the management port. To view ports for an existing VM, use the command show vm {vm_name | detail}.

This command does not take effect until the next time the guest VM is started.

The IAH feature requires the Solid State Storage Device SSD-120.


The following example adds port 1–5 to VM "vm1":

# configure vm vm1 add ports 1-5


This command was first available in ExtremeXOS 30.3.

Platform Availability

This command is available on all platforms that support the Integrated Application Hosting (IAH) feature and have a Core or Premier license installed. For a list of platforms that support the IAH feature and for information about licenses, see the ExtremeXOS and Switch Engine 31.7 Feature License Requirements .