Shows the port specific applicant and registrar states and the configured control values for all MVRP enabled ports.
mvrp | Multiple This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, 5520 series switches. Registration Protocol. |
tag | The 802.1Q VLAN ID. |
vlan_tag | VLAN ID ranging from 1 to 4094 (default is 2). |
port_list | Port list separated by comma or "-". |
N/A.
# show mvrp tag 2 Port Applicant Applicant Registrar Registrar State Control State Control ----- --------- --------- --------- --------- 9 VN On MT Normal 11 QA On IN Normal 13 QA On IN Normal Applicant States: AA : Anxious active, AN : Anxious new, AO : Anxious observer, AP : Anxious passive, LA : Leaving active, LO : Leaving observer, QA : Quiet active, QO : Quiet observer, QP : Quiet passive, VN : Very anxious new, VO : Very anxious observer, VP : Very anxious passive Registrar States: IN : In – Registered, LV : Leaving - Timing out, MT : Empty - Not Registered Applicant Control: On : Transmit On, Off : Transmit Off Registrant Control: Fixed : Statically added, Forbidden : Forbidden VLAN, Normal : Dynamically added
This command was first available in ExtremeXOS 15.3.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, and 5520 series switches.