Shows the port MVRP statistics. The statistics for packet or event counters are displayed as per input.
| mvrp | Multiple This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, 5520 series switches. Registration Protocol. |
| ports | Ports. |
| port_list | List of ports in the switch separated by a comma or "-". |
| counters | MVRP packet and attribute event counters. |
| event | MVRP attribute event counters. |
| packet | MVRP packet counters (default). |
Packet counters.
This command is to show the port MVRP statistics. The statistics for packet or event counters will be displayed as per input. The default is packet counters. The packet counters include Number of VLANs registered on the port, Number of Failed Registrations, Number of MVRPDUs received, Number of MVRPDUs sent, Number of erroneous MVRPDUs received, and the source address of the MVRP message last received by the port. The event counters include the number of different events received/transmitted.
# show mvrp ports 9,11,13 counters packet
Port VLANs Failed Rx Pkt Rx Error Tx Pkt Last Source
Regs Regs Count Count Count Address
----- ----- ------ -------- -------- -------- -----------------
9 2 0 0 0 64 00:00:00:00:00:00
11 2 0 806836 0 433754 00:22:97:00:41:e7
13 2 0 784176 0 404794 00:22:97:00:41:e8
--------------------------------------------------------------------
Regs: Registrations
# show mvrp ports 9 counters event
Port : 17
MRP Attribute Events Rx Tx
----------------------- ---------- ----------
In 250 56
JoinIn 0 0
JoinMt 224 386
LeaveAll 5 0
Lv 0 0
Mt 0 152
New
--------------------------------------------------------------------------
In : Not declared, but registered
JoinIn : Declared and Registered
JoinMt : Declared, but not registered
LeaveAll : All registrations will shortly be deregistered
Lv : Previously registered, but now withdrawn
Mt : Not declared, and not registered
New : Newly declared, and possibly not previously registered
This command was first available in ExtremeXOS 15.3.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, and 5520 series switches.