delete ospfv3 area

delete ospfv3 area [area_identifier | all]

Description

Deletes an OSPFv3 area or all OSPFv3 areas.

Syntax Description

area_identifier Specifies an OSPFv3 area, a four-byte, dotted decimal number.
all Specifies all areas.

Default

N/A.

Usage Guidelines

An OSPFv3 area cannot be deleted if it has an associated interface. Also, area 0.0.0.0 cannot be deleted.

Example

The following command deletes an OSPFv3 area:

delete ospfv3 area 1.2.3.4

History

This command was first available in ExtremeXOS 11.2.

Platform Availability

This command is available on platforms with an Advanced Edge or Base license, or higher, as described in the ExtremeXOS and Switch Engine 31.7 Feature License Requirements document.