configure stpd ports auto-edge

configure stpd stpd_name ports auto-edge [on | off] port_list

Description

Enables and disables auto-edge detection.

Syntax Description


`stpd_name`	Specifies an STPD name on the switch.
on	Enables auto-edge detection on the specified port.
off	Disables auto-edge detection on the specified port.
`port_list`	Specifies one or more ports or slots and ports.

Default

By default, auto-edge detection is on.

Usage Guidelines

None.

Example

The following example enables auto-edge detection on port 1:10 in STP domain r1:

configure stpd r1 ports auto-edge on 1:10

History

This command was first available in ExtremeXOS 15.7.1.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, and 5520 series switches.