disable network-clock gptp ports

disable network-clock gptp ports [port_list {only} | all]


Disables gPTP on one or more ports.

Syntax Description

port_list Specifies one or more the the switch's physical ports.
only Apply change only to specified port, even if port is master of a load sharing group.
all Specifies all of the switch's physical ports.



Usage Guidelines

Use this command to configure on which ports gPTP runs. gPTP runs on no ports if it is not enabled in the switch by enable network-clock gptp.


disable network-clock gptp ports 1-3


This command was first available in ExtremeXOS 15.3.

Platform Availability

This command is available on all platforms if the AVB feature pack license is installed on the switch.