configure mvr add vlan

configure mvr add vlan vlan-name


Configures a This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, 5520 series switches. as an MVR VLAN.

Syntax Description

vlan-name Specifies a VLAN name.



Usage Guidelines

Configures MVR on the specified VLAN. When a multicast stream in the specified MVR address range is received on the VLAN, it is leaked to all other VLAN ports where the corresponding IGMP join message is received. By default, the entire multicast address range, except for the multicast control range is used for MVR. To change the MVR address range, use the following command:

configure mvr vlan vlan-name mvr-address {policy-name | none}


The following example configures VLAN v1 as an MVR VLAN:

configure mvr add vlan v1


This command was first available in ExtremeXOS 11.4.

Platform Availability

This command is available on platforms that support the appropriate license. For complete information about software licensing, including how to obtain and upgrade your license and which licenses support the MVR feature, see the ExtremeXOS and Switch Engine 31.7 Feature License Requirements document.