show msdp mesh-group

show msdp [mesh-group {detail} | {mesh-group} mesh-group-name] {vr vrname}

Description

This command displays configuration information about MSDP mesh-groups.

Syntax Description


detail	Displays detailed information about MSDP mesh-groups.
`mesh-group-name`	Specifies the name of the MSDP mesh-group. The character string can be a maximum of 31 characters.
`vrname`	Specifies the name of the virtual router to which this command applies. If a name is not specified, it is extracted from the current CLI context.

Default

N/A.

Usage Guidelines

Use this command to display configuration information about MSDP mesh-groups, as follows:

For summary information, enter the show msdp mesh-group command.
For detailed information, enter the show msdp mesh-group detail command.
For detailed information about a specific mesh-group, enter the show msdp mesh-group name command.

Example

The following command displays the peer count for a mesh-group:

show msdp mesh-group

The following is sample output from this command:

MeshGroupName                     PeerCount
-------------------------------------------
external                          0
internal                          0
msdp_mesh                         4

The following command displays detailed information about a mesh-group called "msdp_mesh":

show msdp mesh-group "msdp_mesh"

The following is sample output from this command:

Mesh Group Name      : msdp_mesh Num of Peers : 4
Peers                : 54.172.168.97   55.0.0.83       124.56.78.90
221.160.90.228

History

This command was first available in ExtremeXOS 12.0.

Platform Availability

This command is available on platforms that support the appropriate license. For complete information about software licensing, including how to obtain and upgrade your license and which licenses support the MSDP feature, see the ExtremeXOS and Switch Engine 31.7 Feature License Requirements document.