configure stpd ports loop-protect

configure stpd stpd_name ports loop-protect [on | off] port_list

Description

Enables and disables loop protect on a port.

Syntax Description


`stpd_name`	Specifies an STPD name on the switch.
on	Enables loop protect on the specified port.
off	Disables loop protect on the specified port.
`port_list`	Specifies one or more ports or slots and ports.

Default

By default, loop protect is off.

Usage Guidelines

Loop protect prevents loops due to misconfiguration or one-way communication failures.

Example

The following example enables loop protect on port 1:10 in the STP domain r1:

configure stpd r1 ports loop-protect on 1:10

History

This command was first available in ExtremeXOS 15.7.1.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, and 5520 series switches.